nettmus:vxlan_config_example
This is an old revision of the document!
Table of Contents
Vxlan config example
The following recipe may configurs a vxlan tunnel between a linux host and an Aruba switch.
On Ubuntu linux host
- ( Example source )
- Create vxlan device
vxlan0
with vxlan network identifier42
and default port 4789:sudo ip link add vxlan0 type vxlan id 42 dev eth1 dstport 0
On Aruba 2930F switch
- Enter configuration:
# configure
- Enable vxlan tunnels:
(config)# vxlan enable
nettmus/vxlan_config_example.1549544471.txt.gz · Last modified: 2019/02/07 13:01 by 8a1a1133-76ab-498f-a12b-735b77fa7973